Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Sullivan City, TX

Post-Construction Cleanup in Sullivan City, TX

Exterior cleanup after new construction or remodeling: mortar splatter, mud, paint drips and dust on concrete and walls. Typical cost $300-$1,200.

The secret to post-construction cleanup is using the right method, not the most pressure. In Sullivan City, TX, we match the cleaner and pressure to the surface so it comes out clean without damage.

Method and pressure

Pressure wash and detail cleaningCleaning method

Is it time for post-construction cleanup?

  • Mud and tire tracks on new concrete
  • Mortar, stucco or paint splatter
  • Dust on windows and siding
  • Haze left on new masonry

What causes the dirt and stains

  • Construction traffic
  • Masonry and stucco work
  • Painting and cutting dust

What you can do yourself

  • Ask your builder what's included in their final clean
  • Let new concrete cure before heavy washing

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Washing new concrete too early
  • Acid on new masonry without testing
  • Scratching new glass when removing debris

Our process for post-construction cleanup

  1. Walk the site with you or your builder
  2. Remove splatter and debris
  3. Pressure wash flatwork
  4. Soft wash walls
  5. Final rinse and walkthrough

Typical post-construction cleanup prices

$300-$1,200Typical range for a typical new home exterior
2-6 hoursTypical time on site
Once, at the end of the projectRecommended frequency

What moves the price:

  • Area and number of buildings
  • Scheduling: early-morning, overnight or weekend work
  • Whether wash water has to be recovered under local stormwater rules
  • Frequency: recurring service is usually priced lower per visit

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Post-Construction Cleanup in Sullivan City, TX

In Texas, commercial buildings and sidewalks often need cleaning several times a year, because mildew, gum and grime build up quickly in the heat.

Parts of Texas are exposed to hurricanes and tropical storms. After a storm, washing removes mud, debris and salt spray from siding, screens and walkways. Check for damage first: loose siding, broken screens and roof damage need repair before anyone washes them.

Near the coast, salt air leaves a film on siding, windows, screens and railings that dulls finishes and speeds up corrosion on metal. Regular rinsing and washing help protect them.

Some cities in Texas limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.

We provide post-construction cleanup across Sullivan City (ZIP code 78595) and nearby towns including La Joya (5.5 mi), Penitas (8 mi), Perezville (10.7 mi) and Abram (10.9 mi). Call (555) 010-0000 for a free quote in Sullivan City.

Post-Construction Cleanup: frequently asked questions

How much does post-construction cleanup cost in Sullivan City, TX?

Post-Construction Cleanup typically costs $300-$1,200 for a typical new home exterior, and usually takes 2-6 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for post-construction cleanup?

Post-Construction Cleanup is usually done with pressure wash and detail cleaning, with the pressure adjusted for each surface. Delicate surfaces nearby, such as siding, windows and plants, are protected or cleaned with lower pressure.

Is post-construction cleanup safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule post-construction cleanup?

Once, at the end of the project. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Sullivan City, TX

Soft Washing for Tile Roofs

Soft wash. Clay and concrete tile roofs grow algae, moss and lichen, especially in shade.

Typical $300-$800

HOA & Apartment Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $800-$5,000

House Washing for Aluminum Siding

Soft wash. Older aluminum siding often has a chalky, oxidized finish.

Typical $300-$700

Commercial Pressure Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $400-$2,000

Patio Cleaning

Patio cleaning for concrete, pavers and natural stone, with the pressure and cleaner matched to the material.

Typical $150-$400

Commercial Pressure Washing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $400-$2,000

Exterior Mold & Mildew Removal for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $250-$700

Deck Restoration & Staining

Deck restoration that cleans or strips the old finish, brightens the wood and applies a new penetrating stain or sealer.

Typical $800-$2,500

House Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $300-$700

Rust Stain Removal

Removing orange rust stains from sprinklers, fertilizer, furniture and well water on concrete, siding and masonry.

Typical $150-$500

Exterior Mold & Mildew Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $250-$700

Soft Washing for Cedar Shake Roofs

Soft wash. Cedar shakes grow moss and lichen and turn gray as the wood weathers.

Typical $300-$800

Ready for a cleaner home or business?

Get a free pressure washing quote in Sullivan City, TX. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote